Question 5A6

A defective potentiometer in the audio frequency amplifier stage is a common cause of noisy operation. Potentiometers, frequently used for volume control, can accumulate dirt or wear down their resistive tracks. This leads to intermittent electrical contact, producing characteristic scratchy, crackling, or popping sounds in the receiver's audio output, which is perceived as noise. Option A describes normal amplification, not a fault. Option C, low bias voltage in an intermediate frequency (IF) amplifier stage, would primarily cause reduced gain, distortion, or even no signal, rather than the characteristic noise from a defective component in the audio path. Option D, an open winding in an audio transformer, would typically result in a complete loss of sound or greatly attenuated audio, not noisy operation.