Subelement B: MF-HF-DSC-SITOR (NBDP) Equip. & Operations— Topic :
Question 15B5
Element 9 (GMDSS Maintainer)The MF/HF transceiver fails to produce AF output but the radio is powered on and “TX” is illuminated. What is the most likely cause?
Explanation
The most likely cause is a shorted Push-To-Talk (PTT) circuit in the microphone. The PTT switch is designed to place the transceiver into transmit mode. If this circuit becomes shorted, the radio will continuously operate in transmit, regardless of whether the PTT button is physically pressed.
When a transceiver is in transmit mode:
1. The "TX" indicator illuminates to show transmission is active.
2. The receiver section, including the AF output stage, is automatically disabled to prevent audio feedback and to route all power to the transmitter.
Therefore, a continuously shorted PTT circuit perfectly explains why the radio is powered on, the "TX" light is illuminated, and there is no AF output from the receiver.
* A shorted speaker (A) or a failed AF amplifier (D) would prevent AF output but would not cause the "TX" light to illuminate. The radio would remain in receive mode.
* A "crowbar" circuit (C) in the power supply is a protection mechanism that would typically shut down power to the radio entirely, meaning it wouldn't be powered on or illuminate "TX."
Related Questions
15B3 The MF/HF transceiver produces strong AF output but no signals are heard on any frequency. What is the most likely cause?15B4 The MF/HF transceiver produces strong AF output but no signals are heard on any frequency. What is the most likely cause?15B6 A received signal on a MF/HF transceiver breaks up rapidly and repeatedly. The signal alternates between mid scale and zero on the “Signal” meter. What is the most likely cause?16B1 How is a J3E signal generated?16B2 What would be the most likely power level to use for initial MF-HF communications?